How much does ASTM A500 steel tubing cost?

Home > Blog > How much does ASTM A500 steel tubing cost?

ASTM A500 structural tubing has no single fixed price. Suppliers usually quote it per metric ton, per pound, per foot, or per piece. The number moves with steel coil costs, grade, size, wall thickness, order volume, processing, freight, and duties. In my experience, buyers get the most accurate figure when they send a full specification and ask for a delivered-cost quotation instead of a bare ex-works price. This guide shows how I calculate ASTM A500 steel tubing cost, which factors change it, and how to compare quotes fairly so your project stays on budget and on schedule.

ASTM A500 structural tubing

ASTM A500 structural tubing

How Is ASTM A500 Steel Tubing Pricing Calculated?

Price Units and Weight Conversion

Price per metric ton is how most quotes begin. The price is then changed to price per foot or per piece. That change is based on how much you weigh. I use the formula (outside diameter - wall thickness) × wall thickness × 0.02466 to find the weight in kilograms per meter of round tube. The outside diameter and wall thickness are both given in millimeters. Weight charts for both square and rectangular sections can be found in this book from AISC Steel Construction. The price per foot goes up when more steel is added, but the price per ton stays the same. Make sure that the weight a supplier gives you is always the real weight and not just a guess. There are some ways that the two can be different.

What Are the Main Factors That Influence ASTM A500 Tubing Cost?

Raw materials are the main driver. As the steel market changes, so do the prices of ERW tubes, which are made from hot-rolled steel coil. After that, the price will depend on the type and grade, the outside dimensions, the wall thickness, the length, the tolerances, the number, the tests and papers, the surface treatment (like hot-dip galvanizing), and the delivery terms. Custom pieces or lengths that are cut to exact measurements are often more expensive than normal stock sizes. This is because the mill doesn't have to make a special batch. When a third party checks, tests, and puts things together for a job, the costs also go up. Not just the highest price per ton, but I think you should compare all of the specs as well.

Practical ASTM A500 Tubing Cost Estimation Example

This is not a market price, but a way to buy. Let's say a supplier tells you that the price is $1,000 ton. It weighs about 16.07 kg per meter for a tube that is 114.3 mm in diameter and 6.02 mm thick at the walls. That's about $16.87 per meter, or $4.90 per foot. A 12-meter piece that weighs about 193 kg costs about $193. A 219.1 mm OD tube with a 6.35 mm wall costs the same amount per ton, so it weighs about 33.31 kg per meter, or $33.31 per meter. Every price is the same for a ton, but every price for a foot is very different. Then you need to add the costs of shipping, insurance, taxes, inspection, cutting, coating, and shipping. It costs this much to land. Make a line for each thing you want.

ASTM A500 Structural Tubing Specifications Buyers Should Verify

Grades A, B, and C and Their Strength

ASTM A500 structural tubing is carbon steel tubing that has been cold-formed, welded, or not joined at all. It comes in round, square, and rectangular shapes. Longma Group sells grades A, B, and C. It takes at least 42 ksi of force to bend Grade B round tubing, and it takes at least 58 ksi of force to bend it. There must be at least 46 ksi of bending strength in Grade B shaped tubes. For Grade C, the lowest yield for rounds is now 46 ksi, and for shapes, it's 50 ksi. Tensile strength must now be at least 62 ksi. With a 33 ksi return for rounds, Grade A has the least strength. Sometimes, Grade C lets you use a lighter piece with the same load, which can make up for the fact that it costs more per ton. Make sure you have the right edition of the standard and check to see what grade your drawings are for.

Dimensions, Tolerances, and Corner Radius

Our ASTM A500 structural tubing comes in lengths ranging from 3 meters to 12.5 meters and outside diameters ranging from 114.3 mm to 1422 mm. The wall thickness ranges from 6.02 mm to 101.6 mm. Size changes the price because it changes the weight. The standard lets the thickness of the walls be up to 10% less than what it should be. Because of this, AISC 360 tells engineers to use a design wall thickness that is 0.93 times the standard for ERW sections. The outside corner radius of square or rectangular tubing can't be more than three times the wall thickness. You need to know this to figure out the part value. If you want to place an order, you should get written confirmation of the length, squareness, and straightness.

ASTM A500 Compared With A53 and A1085

What it says is that ASTM A53 pipe can be used for things like moving liquids and mechanical jobs. If you want to switch between ASTM A500 and another standard, you need to get permission from an engineer first. Another new standard, ASTM A1085, is for hollow structural pieces that are cold-formed and welded. The minimum yield is set at 50 ksi, and the wall thickness tolerance is −5%. Charpy impact testing is also done. Check both early because it might not be available or cost the same as A500. You can't get mechanical test data or heat traceability for mild steel tubing that doesn't have an ASTM certificate. When you compare based on the standard, you don't have to try changes that don't work and find out that they cost more than you thought.

How to Choose and Compare ASTM A500 Tubing Suppliers

Match Shape and Grade to the Structural Application

Square tubing is good for symmetrical frames, posts, and equipment bases because ASTM A500 structural tubing can support the same amount of weight on both sides. Round tubes work well for beams and purlins that bend mostly in one direction. As long as they don't twist, round tubes can be used for beams, trusses, and handrails. When engineers pick a grade, they should check it against the design code to see how much axial load, bending, bowing, connection forces, and corrosion limit it has. Sometimes it's not the best idea to choose the cheapest or best quality item on its own. A Grade C piece that is less large might be cheaper to put in, but a member that is too small won't pass inspection. Before the RFQ is sent out, I think the structural engineer should be present.

How to Compare Suppliers and Quotations

Get prices from different sellers for the same grade, length, width, number, tolerances, documents, Incoterm, and port of delivery. That way, you won't be able to compare the numbers. What kind of business is it? A mill, a maker, a seller, or a fabricator may be the answer. Get a Material Test Certificate (MTC) that matches the heat numbers on the tubing and can be used to track the heat. One company that has been making ERW and LSAW pipes since 2003 is Longma Group. By the end of 2023, they will have sent more than a million tons of goods to over ninety countries. Then, look at the landing cost, which includes getting it cut, inspected, packed, shipped, insured, taxed, and delivered locally. Standards that aren't clear, certificates that are missing, substitutions that aren't explained, and lead times that aren't clear are all red flags.

What Longma Group Offers Buyers

People who work as contractors often ask me about stock, processes, and papers. In each area, this is what Longma Group has to offer.

  • Stock and speed: Every day, we have 50 to 100 tons of ASTM A500 structural tubing in stock. In as little as 7 days, we can send it to you. Less stock cuts down on lead times and keeps workers from getting fined for being late. When giving quotes for custom sizes, I make sure that the wait times are included. They depend on the diameter, wall thickness, and number of items.
  • Traceability and documents: Mills in China, such as Shagang, TISCO, Bao Steel, Shougang, and HBIS, provide us with their steel. We keep track of everything, from the raw materials to the finished goods. A Material Test Certificate (MTC), an Inspection and Test Plan (ITP), and a Manufacturing Procedure Specification (MPS) are the things we have to offer. You can also find us on the ISO 9001 and FPC lists.
  • Processing and coatings: For links that mate, we can weld, perforate, widen, and treat the ends. You can get FBE, 2PP, 3LPE, and 3PE coats from us to protect against rust. To keep things simple, I put the coating on its own line in the quote. Bare carbon steel needs to be protected in places that are wet or near the coast.

These points target the delays and paperwork gaps that cause the most trouble on contractor projects.

How to Buy ASTM A500 Structural Tubing Efficiently and Control Cost

Write a Clear RFQ

The RFQ for ASTM A500 structural tubing should include the standard and version, grade, form, outside measurements, wall thickness, length, number, limits, surface condition, tests, certificates, location, Incoterm, and the due date for delivery. A supplier has to guess or ask questions when they don't have enough information. This takes days for each trip around. The most time is saved when the drawing or cutting list is attached by the buyer or engineer. Let us know if you need Grade B or Grade C. Please let me know if the tubes will be steel. How thick the zinc coating is and how it looks depend on how much silicon is in the steel. When RFQs are clear, quotes are made faster and with more accuracy.

Reduce Total Cost Through Planning

Cutting down on waste is more helpful than saving a few dollars per ton. Accurate cutting lists and standard stock lengths keep the number of offcuts to a minimum. Shipping loads are also smaller when items of the same size are put together. Stick to what the engineer says about how thick or accurate the walls should be. You might find that a cheap material costs more when you account for things like long lead times, extra work, material that doesn't work, or high freight costs. Before making a big order, you can place a test order to see how the papers, sizes, and marks look. People who buy from you often can agree on the price, the delivery date, and the bare minimum that is needed to keep the budget stable.

Protect Your Schedule With Stock and Clear Terms

Most of the time, it costs more to wait to get materials than to buy the steel itself, especially when contracts have daily penalties. I think you should check supplies first and plan custom sizes earlier because stock sizes keep schedules short. How does your supplier handle small add-on orders when there is an engineering change? What are its payment terms? Get these things in writing before you place the order, since they will be different from one supplier to the next. You should also talk to your customs broker about any import taxes, like steel-related taxes, because the rates change.

Conclusion

The price of ASTM A500 structural tubing is not set in stone. It depends on the grade, shape, weight, amount, processing, and delivery terms. To find out how much each piece really costs, change the price from per ton to per foot with made-up weight. A500, A53, and A1085 are all used for different things and have different standards and tests. Grades B and C have different output strengths. This is the reason why the design must match the specification. You might find extra costs when you compare quotes with the same terms and as far as the land cost. It's cheaper to buy structural tubing when there are clear RFQs, good planning, enough stock, and papers that have been checked. They do this by cutting down on waste, extra work, and waiting.

FAQ 

Is there one standard price per foot for ASTM A500 tubing?

No, the price per foot depends on the grade, the outside dimensions, the wall thickness, the amount, the state of the steel market, and where the delivery is made. Change any price per ton by estimating how much it weighs, then look at different quotes that are based on the same words.

Is Grade C always more expensive than Grade B?

Not all the time. Prices change based on when jobs need to be done and how much stock a supplier has. Ask for both grades on the same assignment. If you use a lighter section of Grade C steel to carry the same load, it will still be strong enough.

Can ASTM A500 tubing be hot-dip galvanized?

Yes. Before production starts, check the MTC and talk about galvanizing. The amount of silicon in the steel affects how thick the coating is and how it looks.

Which documents should I request with my order?

For the Material Test Certificate (MTC), measurement reports, and heat tracking records, you should ask for them. When it comes to engineering projects, Longma Group also has an Inspection and Test Plan (ITP) and a Manufacturing Procedure Specification (MPS).

What is the difference between ASTM A500 and ASTM A53?

ASTM A500 tells us how to make structural tubing that is used in load-bearing parts that doesn't go too far off from the expected size and shape. ASTM A53 covers pipe that is used for both mechanical and pressure reasons, so don't use anything else until you get permission from an expert.

Request ASTM A500 Structural Tubing Pricing from Longma Group

Email Longma Group at info@longma-group.com with your grade, size, length, wall thickness, and number of things you need. Then, our team will send you a price for how much it will cost to deliver. We can offer Grades A, B, and C ASTM A500 structural tubing, 50–100 tons of stock, shipping in as little as 7 days, and MTC papers because we make it. Find out more about our products at longma-group.com, or send us your project plans right now so we can check our stock and let you know when your order will arrive.